Water Damage Restoration Services in Murfreesboro, TN
Water in the house? We handle water damage restoration in Murfreesboro, TN from the first call to the last baseboard: we pull the water out, dry the structure until the moisture meter says it’s dry, and repair the floors, walls and ceilings it touched.
Call now: (615) 821-1402- Moisture mapped room by room
- Daily drying readings
- Photos for your insurer
- Shut the main water valve
- Power off near wet areas
- Photograph every wet room
- Call: mold can start in 24–48 hours
What to do right now
The first hour decides how much of your house can be dried instead of torn out.
Is it an emergency?
A quick check before you decide what to do tonight.
Call now if
- Water is still coming in or standing on the floor
- A ceiling is sagging, bulging or dripping
- It’s sewage, storm or river water
- Water reached outlets, the electrical panel or appliances
- A crawl space or basement has standing water
Can usually wait until morning
- A small, dry stain that isn’t growing
- A leak you stopped and wiped up within minutes
- A musty smell with no visible water (still worth checking soon)
Restoration services in Murfreesboro
One call covers the water, the damage it leaves behind and the problem that let it in.
What happens when you call
- STEP 1You call, we listenTell us where the water is, where it came from and what it touched. We tell you what to do while the crew gets moving.
- STEP 2Inspect and mapMoisture meter and thermal camera readings in every affected room, plus photos for your insurance claim.
- STEP 3Extract and dryExtractors pull the standing water; air movers and dehumidifiers dry the structure, with readings logged every day.
- STEP 4Repair and rebuildDrywall, ceilings, baseboards and flooring go back once the materials read dry, not before.
Burst pipes and supply-line leaks
Most household water damage starts inside the house: a split washing machine hose, a failed water heater, an ice-maker line under the fridge or a pipe that froze in an outside wall during a cold snap (here is what to do when a pipe bursts). Clean supply water is the easiest kind to dry, but it travels. It runs under cabinets, wicks up drywall and soaks into the subfloor long before you see it.
We follow the water with a moisture meter and thermal camera instead of guessing. That’s how wet insulation behind a baseboard or a soaked toe-kick under the kitchen cabinets gets found and dried, instead of turning into a musty smell three weeks later.
Flooding and storm water
Heavy spring storms push water under doors, through window wells and up through slab cracks. Parts of Murfreesboro also deal with sinkhole flooding: the area sits on limestone, and during long, heavy rains water can back up out of sinkholes faster than it drains, as a USGS study of Murfreesboro sinkhole flooding documented.
Storm and flood water count as contaminated (Category 3), so water damage cleanup goes further than drying. Soaked carpet pad, insulation and the bottom of the drywall come out before drying starts; what stays gets cleaned and treated.
- Stains or rings on ceilings
- Musty smell that won’t clear
- Bubbling or peeling paint
- Cupped or warped wood floors
- Soft or swollen drywall
- Water bill jumped for no reason
Water in the basement or crawl space
If your home sits over a crawl space, that is where water hides longest. Standing water under the house raises humidity in every room above it, soaks insulation and softens floor framing. We pump it out, pull wet insulation, dry the space with dehumidifiers and then look at why it got in.
If it’s a one-time leak, drying is the fix. If water comes back with every heavy rain, the real fix is sealing and drying out the crawl space or fixing how water drains around the basement.
Sewage and Category 3 water
A sewer backup or overflowing toilet is a different job from a burst pipe. The water carries bacteria, so porous materials it touched are removed, not dried, and everything else is cleaned and sanitized. Keep kids and pets out of the area and don’t run fans that spread the air around. Our sewage cleanup page covers what’s safe to save.
How we dry your home
Drying is a measured process, not fans and hope. On the first visit we take readings of the wet materials and a dry reference point in an unaffected room. That gives the target.
- Extraction first. Every gallon pulled out with an extractor is a gallon the dehumidifiers don’t have to pull from the air.
- Air movers and dehumidifiers. Air movers push moisture out of the materials; low-grain refrigerant dehumidifiers pull it out of the air.
- Daily readings. We check the same spots every day and adjust equipment until the materials match the dry reference.
- Equipment comes out when the numbers say dry, not after a set number of days.
Water damage repair after drying
Once the structure is dry we put it back: new drywall where flood cuts were made, ceiling patches, baseboards, insulation, and flooring. Hardwood that cupped often flattens as it dries, so we wait for readings before deciding whether boards need replacing. You get a written scope of the repairs before work starts.
Mold after water damage
If water sat for more than a couple of days, or the leak was slow and hidden, mold may already be growing behind walls or under flooring. We check for it during drying. If it’s there, the affected area is contained and handled as mold remediation before rebuild, so it isn’t sealed back in behind new drywall.
What decides the size of a water damage job
| What we look at | Quicker dry-out | Longer job |
|---|---|---|
| Water type | Clean supply line | Storm, flood or sewage water |
| Time it sat | Caught within hours | Days, with wicking or mold |
| Area | One room, one level | Several rooms, ceiling below, crawl space |
| Materials | Tile, sealed concrete | Hardwood, carpet pad, insulation |
| Access | Open rooms | Inside walls, under cabinets, tight crawl space |
What adjusters usually ask for. We document most of it on the first visit.
- Photos and video of every wet room and the source
- Cause of loss: the pipe, appliance, roof or storm
- Daily moisture logs from drying
- List of damaged items, kept until the adjuster sees them
Fire, mold, foundation and waterproofing
Water rarely stops at one problem, which is why water and fire restoration so often go together. A house fire leaves smoke, soot and soaked rooms from the hoses, which is why fire damage restoration is part of the same work. A musty room after a leak may need mold testing first. And when water keeps finding its way in, the cause is often outside the walls: foundation cracks and settling, poor drainage around the basement, or a damp crawl space.
Areas we cover in Murfreesboro
We work across Murfreesboro, from older homes near the downtown square and the MTSU area to newer subdivisions out toward Blackman, Siegel and Barfield. Water damage in Murfreesboro looks different from house to house: slab or crawl space, one story or two, we plan the drying around how your house is built. See the full service area.
Questions homeowners ask
How long does water damage restoration take?
Drying usually takes three to five days, depending on how wet the materials got and what they’re made of. Repairs come after that and depend on how much drywall and flooring had to come out.
Will homeowners insurance cover it?
Sudden, accidental damage like a burst pipe is often covered. Slow leaks, maintenance problems and flood water usually aren’t, and flood needs a separate flood policy. Check your policy, report the claim early and keep the photos and moisture logs.
Can I stay in the house while it dries?
Usually yes with clean water; the equipment is noisy but safe. With sewage, heavy mold or a sagging ceiling, we’ll tell you which rooms to stay out of.
Can I just use fans and a shop vac?
For a small spill caught right away, often yes. Once water gets under flooring, into walls or under cabinets, household fans dry the surface while the inside stays wet, which is where mold starts.
How do I choose a water damage restoration company?
Ask how they decide a house is dry (moisture readings, not a set number of days), whether you get the scope in writing before work starts, and whether they photograph and log everything for your insurer. Be wary of anyone who only brings fans.
Do wet carpets have to be thrown out?
Carpet soaked by clean water can often be dried in place, though the pad usually gets replaced. Carpet soaked by storm or sewage water comes out.
Shut off the water, then call. We’ll take it from there.